5 Best Scope Mounts for Vortex Viper PST

Viper PST falls in the list of the top-notch riflescopes in the market. This 30mm diameter one-piece scope has unmatched features and hence, has gained much popularity among rifle enthusiasts. It is a series of riflescopes with many efficient models including the latest 6 24x.

Featuring cutting-edge engineering and solid construction, this scope deserves an equally well-built scope ring to be mounted on your gun. And in this blog, we’ll give you some great options for the same.

Top 5 Best Scope Mounts for Vortex Viper PST

Hunters have finally realized the importance of good scopes for their firearms. But, even the finest optics will fail if you don’t have the proper base to secure it on your rifle. And you wouldn’t believe that thousands of bullets are shot in vain every year only due to incorrect mount set up.

This usually leaves a hunter/shooter berserk wondering where they went wrong. So, in this blog, we discuss all the best scope mounts you could get for your Vortex ViperPST firearms. Additionally, we’ll also look at the ways to identify the right mounting system for your rifle.

The red dot scopes can sometimes be very close to your eyes. And this could also dominate your field of vision. To overcome this problem, you need a piece of equipment called the red dot magnifier but fitting another accessory is not possible with a standard mount. So, for this, a cantilever scope mount could be very useful.

One of the best such mounts is the Vortex Optics Precision Extended Cantilever Mount. This is one of the best scope rings in the current market. It is specifically designed for all those scopes having a forward location.

It provides much-needed eye relief and proper head placement while shooting. Moreover, these cantilever rings also add some height to the scope for better vision and eye relief. It specifically adds a height of 1.574″/ 40mm to the riflescope rings. Also, you don’t have to spend any extra effort on alignment.

The lapping procedure becomes much simpler and saves a lot of your time. The cantilever mount is made of milled aluminum and is of very good quality. It promises a secure fit and the screws will never slip off while installation.

This 30mm ring is a very popular choice for Vortex Viper PST 6. One of the unique creations from Vortex, this scope base ring allows you to make sure that your rifle is placed vertically. As a result, you won’t make any errors while shooting. So, this makes sure that your shots are aimed accurately which is not possible with a canted gun.

Moreover, it is easy to mount, so the installation process is also fairly quick. And you’ll get to know of its real potential when you use it for long-range shooting. By eliminating all scenarios of potential errors, it makes sure that you hit your aim every time.

It is mounted best on the muzzle side of the riflescope’s turret since it is a bit bigger than other bubble scope mounts. The distance between the bubble and the sidelines is small and the bubble navigates quickly due to the less dense fluid. It is of extremely high quality and won’t disappoint you.

Lastly, it adds some height for improved vision while shooting. It is sturdy and will last long enough and it comes with a warranty too.

This is a pair of scope mounting rings that can place the center of your riflescope at a height of 0.97 inches. You could also buy other variations of this product that offer different upliftment to the scope. Also, keep in mind that the Vortex precision matched rings cannot work with Weaver scope bases. They are compatible with Picatinny scope bases only.

Since these come in pairs, you are saved from buying another piece. The rings are made of billet aluminum and have a high tolerance. These will fit your scope tightly and securely and not loosen that easily.

Straight from the house of Vortex, these Vortex precision rings are serialized and are of very high-quality. Lastly, for finishing the product, these have a unique Type III hard coat anodize. And you also get a hex wrench with the entire package.

The Weaver dovetail mount rings are made of high-quality solid steel. This makes them sturdy enough to withstand heavy and aggressive recoils. Also, it has a cross lock design that allows you to securely fit on your rifle.

The cross-lock design has passed the test of time and is famed for providing tight fit on any of your favorite guns like the Vortex Viper PST 6 or something else. These rings perform really well when exposed to pressure.

Every Weaver Grand Slam Ring has an integrated square recoil lock on its inside lining. This allows the meticulous ring to scope base contact and hence, provides the maximum recoil resistance. So, it is safe to say that these mounts are good at handling heavy recoils and won’t loosen easily.

Lastly, the head screws provided would neither slip nor strip off while installation. Keep in mind that this mount fits weaver style scope bases only.

This is a dual ring one-piece scope mount suitable for 30mm rifle scopes. These 30mm rings have a slim construct that besides being stylish, is very lightweight as well. Also, it is rigid and the one-piece mount makes it quite convenient to use.

It is compatible with any Picatinny rail scope base. The forward extension of 2 inches will give you some flexibility. This, in turn, provides you with proper eye relief seconded by optimum shooting posture.

The Monstrum Tactical Cantilever scope mount is designed specifically for a 30mm gun barrel. This scope mount weighs only 5 ounces and is made of aircraft-grade aluminum. The insides of scope rings are lined by square integral recoil stops.

These will hold the rings and the scope in position every time your rifle recoils. Moreover, these would also lower the weight and increase the strength of the mount. The scope mount is 5 inches long, the base is 3 inches and the rings have 2.5 inches of spacing.

Things To Consider While Looking for Scope Mounts for Vortex Viper PST

1.Material

Scope rings and bases are usually constructed with aluminum or steel. While steel is the strongest material that a scope mount could be made of, aluminum is lightweight and also costs much less. So, steel has been in use for decades now.

The reason behind this is that being strong, it can withstand strong recoils with ease, especially when mounted on heavy guns. But, nowadays aluminum has taken the center stage because it is cheaper. And when the construction is done with some alloys, the set-up can be equally strong as steel.

2.Eye Relief

There needs to be a certain distance between your eye and the scope. This can be achieved by the mount. So, keep this point in mind while choosing a scope base for your rifle. Moreover, the improper height of the scope and wrong alignment can also distort your aim and cause visual strain.

3.Fitting

Keep in mind that when you fire a shot from your gun barrel, the gun including all its parts experience recoil. So, the mount you use should offer a secure fit, otherwise, it will loosen with time and thus, result in a distorted aim. Also, it should be strong enough to be able to tolerate the recoil force.

4.Scope Mount Type

a. Combo of Base and Rings

These days you can get a combination of the scope base and the rings, i.e., the entire package in one product. This is a pretty clever design and won’t encourage any movement between the firearm and the scope.

An improvement of the one-piece design is the cantilever scope. Such scopes are tactical and are good for mounting red dot scopes. These also leave enough room behind for you to install a magnifier. Moreover, they give you the proper eye relief needed to make accurate shots.

b. Two-piece scope rings

The two-piece design is not that tactical as the aforementioned one-piece style. But, these can be very advantageous as well. These allow you some clearance space to clean the chamber of your bolt action gun.

It’s not that hard to align these scopes, but the one-piece design didn’t need alignment at all. But, these are more affordable than the one-piece base plus ring combo.

c.Fixed Scope Mounts

You get plenty of variation under this type but remember that all of these are ideal if the hunter prefers using the mount for a single gun.

The types include dovetail design, universal design, Weaver and Picatinny rails. Generally, your rifle type and your preference will dictate the type of mount you should buy. There are plenty of other unique styles available as well.

d.Detachable Mounts

As the name suggests, these allow you to quickly install and remove the gun scope base. In case you want to use the same base for different guns, then a detachable mount will prove to be an appropriate choice for the job. Also, if your optic breaks, then you can use an immediate replacement.

5. Price

Needless to say, your budget is a pretty important aspect to consider while buying anything at all. And it becomes all the more important when it comes to purchasing a scope mount. You must have already spent quite a good amount of money on the rifle and scope itself. So, it only makes much sense if you want to go for a scope mount in the low price range. But, you need to consider the quality of the scope as well.

Turns out, not all cheap scopes are of good quality. You have to scrutinize and select accordingly. Otherwise, you can invest a higher amount of money and buy a costlier base if you want to use it for a long time.

Conclusion

It is recommended that you spend only as much as you can while buying a new scope base or rings. But, you need to pick the right mounting system and the best item available in your budget. This way, your mount will be compatible with your scope and gun. Also, you will get the best possible performance from the set-up.

We hope that your search for the best scope mounts for your Viper PST scope has come to an end here. Thanks a lot for reading till the end and please let us know your viewpoints in the comments below!