is reader-supported. When you buy through links on my site, I may earn an affiliate commission. For more details Click Here.

5 Best M1 Carbine Scope Mounts

best m1 carbine scope mount

M1 Carbine is a historic rifle that was used in World War 2 and several other US military wars. Besides holding high historic importance, it is also a standard defense rifle. It offers amazing accuracy and shooting range to the hunter.

But, it isn’t as heavy as an infantry rifle. Neither does it generate strong recoils nor does it cost too much. Hence, it delivers quality performance and is convenient to carry around. So, if you happen to own this majestic gun and are willing to upgrade it with some scopes, then you will also need a mounting system to hold the scope in its place.

Top 5 Best M1 Carbine Scope Mounts

NameSepcsUSPToday's Price
UTG M1 Carbine Mount4.8x1.93x1.93 inchesOverall performanceClick Here
Monstrum Precision Picatinny Scope Rings30 mmCheap PriceClick Here
NcStar M-1 Carbine Weaver Scope MountNAStrongClick Here
Precision Metalworks M1 Carbine Scope MountNAEasy to installClick Here
MIZUGIWA Dual Ring Rifle Scope Mount20mmEye ReliefClick Here

If your head is full of doubts and you just can’t figure out which mount will be an ideal fit for the M1 Carbine, then we do understand your situation. Not to worry because we bring you the top 5 scope mounts to use with your M1 Carbine gun. Added to that, we have a thorough buying guide as well that will help you gain better knowledge about scope mounts.

1. UTG M1 Carbine Mount Complete with 1″ Rings

UTG M1 Carbine Mount on of the Best M1 Carbine Scope Mounts

This mount is machined from aluminum and finished off with an excellent matte black finish. The aluminum construction makes it strong and lightweight. On the other hand, the matte finish gives it a sleek look and an extra layer of protection.

The design of the mount is clever and has an insert plate that allows you to install the mounting set up conveniently. It comes along with 1-inch weaver tactical scope rings. So, you get both scope base and rings together and don’t have to buy anything differently.

Moreover, both mounting base and rings are available at a low price which is much lower than the price in which other brands sell one of these items. So, you are saving a lot of money here. Other mounts for M1 carbine might cost you a fortune.

This inexpensive choice, on the other hand, fits perfectly and holds tight enough. It also allows you to mount a red dot in the rear.


  • Easy to install
  • Doesn’t need additional rings
  • Good fit
  • Solid construction
  • Budget-friendly


  • Might require some adjustments to be made


If you are looking for an inexpensive mounting set up, then this product is the best one out there. It is a combo of rails and rings and works like a charm on your gun.

2. Monstrum Precision Picatinny Scope Rings 

Monstrum Precision Picatinny Scope Rings

These precision rings from Monstrum are meant to fit Picatinny rails only. Crafted from high-quality 6061 T6 aluminum, these scope rings are meant to deliver the utmost strength and durability. Moreover, these are very light weighing around 1.5 oz each.

With a coating of Type III hard anodization, these rings are wear-resistant and have a sleek and stylish finish. It also comes with hardened steel hardware so that you can properly install the mount. It also features a couple of super integral recoil stops, that makes sure that your scope stays in place and handles kickbacks well.

These are available in various heights to ensure that you get the optimum visual clearance and proper eye relief. Also, the locking bolts are so tight that your scope won’t even wiggle a bit. It will hold zero against heavy recoils. The only drawback it has is that it isn’t compatible with Weaver-style rails.


  • Solid construction
  • Hard anodized finish
  • Lightweight
  • Durable and long-lasting
  • Holds tight against heavy recoils
  • Cheap price


  • Not compatible with Weaver-style rails
  • Might require some metal filing for proper installation


This is one of the best mounts you could get in the low price range. Not only is it super durable and stress resistant, but it is also lightweight. Hence, it is a great option to go with your Picatinny mount base.

3. NcStar M-1 Carbine Weaver Scope Mount (MM1)

NcStar M-1 Carbine Weaver Scope Mount

This is a Weaver-style rail for your M 1 Carbine rifle. It fits comfortably in the rear sight of the rifle and doesn’t wiggle from its position. You can get it in place with just a couple of taps with a hammer. Made with hard-anodized aluminum to make it very strong and secure.

The mount sits securely on your gun and is easy to tighten. Also, the screws won’t strip off when you tighten them. The dovetail nuts and the bolts of the weaver rail have optimum threads to ensure an efficient locking system.

However, this product could be difficult to zero. The reason is that the zero is placed at the extreme deflection of the scope to make up for the height. All in all, it is a good enough product for the price tag it comes at.


  • Easy to install
  • Secure fit
  • Strong body
  • Handles recoil very well


  • Difficult to zero
  • Could have had more threads


This is one of the cheapest scope mounts you could get in the market for your Carbine M1. It is strong, fits well, and has only minor drawbacks. So, it isn’t a bad deal for the price it comes at.

4. Precision Metalworks M1 Carbine Scope Mount

Precision Metalworks M1 Carbine Scope Mount

This mount is machined with aluminum alloy that makes it a standard quality mounting. Installing it is also pretty easy, you don’t require any drilling, gunsmith skills, etc. to set it up on your gun.

It is one of those products that give an overall good performance. With a strong build and durable structure, rest assured that you will get heavy resistance against recoils. Also, it holds zero pretty well. This mounting system also has a threaded wedge that fits well into a joint to hold the scope in position.

Made with aluminum alloy, it is quite tough and resistant to extreme weather conditions. Moreover, it is also lightweight since it is constructed with industry-standard aluminum and will last longer too.


  • Strong build
  • Easy to install
  • Lightweight
  • Holds tight


  • Costly


If budget is not a problem for you, then you can surely get this scope mounting system for your M1 Carbine rifle. But, there are other mounts available with better features and a lower price range, so, you might want to take a look at other options as well.

5. MIZUGIWA 1 inch Cantilever Flat Top Weaver Forward Reach Dual Ring Rifle Scope Mount

MIZUGIWA 1 inch Reach Dual Ring Rifle Scope Mount

This is one of the most unique mounting products from the Mizugiwa brand. Not only does it come at a pocket-friendly price, but also comes with several amazing perks and benefits. This is a forward pushed mount that allows you proper visual clearance while aiming and also makes room for extra optic accessories like a magnifier or red dots.

This is a tough cantilever style mount that is heavier than other mounts. It weighs 8.3 oz but comes with several features that compensate for it. The ring tops and the sides feature a laser flashlight. You will not find another mount that does this. These laser lights allow you to view your target clearly when there is a shortage of light or at night.

Hence, hunters who are interested in night hunting will find this to be a great opportunity. Moreover, it can be mounted on both Picatinny and Weaver-style rails. So, you are free to choose whichever scope base you prefer.


  • Comes with laser flashlights
  • Enhances accuracy
  • Provides optimum visual relief
  • Strong construction
  • Long rail to ensure proper mounting


  • Heavy


This is a great item with unique and innovative features that makes your hunting experience easier. Night hunters will prefer it more since it has flashlights mounted on its body. Moreover, it has optimum overall features and is available at a low price range.

Things to Keep in Mind While Buying a Scope Mount for M1 Carbine

One-piece or Two-piece Mount

A single piece scope mount is a combination of scope ring and base. With this kind of mount, you wouldn’t need a separate pair of rings. This ensures better stability of the scope and better recoil resistance. If you get the cantilever style single piece mount, then you will be even more advantageous because these are pushed forward to ensure proper visual clearance.

You can also install an extra magnifier for better accuracy. The two-piece mounts are lighter and more flexible. You can freely decide the distance between the scope rings and position them as per your preference.

Fixed or Detachable

Mounts for a scope can be of two types: fixed and detachable. You cannot remove a fixed mount from your gun after installing it. So, this means that the scope base will stay strongly affixed on your gun. This can be advantageous for some but problematic for others.

On the other hand, the detachable scope base proves to be of better use since you can remove it as and when the need arises. You can use the same mount for several of your rifles too or quickly replace it if it breaks.


Plenty of hunters prefer installing their scope mounts on their own. If you are someone like this, then you need to check first that the mount is easy to set up or not. Some mounts might need filing, drilling, or other adjustments to be made before they fit your rifle properly. So, you need to make sure that you know the installation procedure and feel confident to execute the same.

Otherwise, you might need to call in a gunsmith. A lot of the mounts cannot be installed correctly on your own and the result is an uncomfortable shooting experience. Check if the mount can be installed with simple hardware or not. Some packages come with all the hardware pieces required to set up the mount.


Your scope needs to be at a certain height so that you can view your aim clearly. Otherwise, you might end up missing your targets, making errors while aiming, and losing accuracy. So, make sure that your mount elevates your scope to a proper height that gives you clear vision and optimum visual relief. Too low could not be ideal for some scopes while too high could put a strain on your eyesight. Make sure that you check all the specs and pick the mount with the ideal height.


You need to check the internet and the product page for reviews and ratings. Previous customers who have already used the mount for quite some time can give you a piece of detailed information about how well the mount performs in reality. You could check several things like if it lives up to what it is advertised to be. If it is easy to install or not, what troubles you might face, if the scope holds zero or not, and all such things can be found out through the reviews.

Quality and Durability

The quality of the scope mounting set up is also quite important. You should choose between aluminum or steel mounts mainly because these are the two standard construction materials in the industry. These ensure that your mount is lightweight and sturdy enough to tolerate high recoil forces. Otherwise, your mount base and rings will break easily when your gun gets a kickback.


You must check if the mount’s price justifies its features or not. Nobody wants to pay more for something they could have purchased at a lower price. Again, buying a scope mount in the low price range could also mean that it won’t be of high quality.


Since the M1 Carbine doesn’t create heavy recoils, so you do get the freedom to buy a mount that is not very tough and durable. Also, this gun is not as heavy as other infantry rifles, so you can choose to purchase a mount that is a bit heavy. We have prepared an assorted list of the best mounts in the market for an M1 Carbine gun. Hopefully, your search for the perfect scope mount ends here.

Leave a Comment

Your email address will not be published.